BTHYH - PARKS PAINT THINNER

  • MSDS: BTHYH
  • Manufacturer: PARKS CORP
  • Product Name: PARKS PAINT THINNER
  • National Stock Number: 8010-00F001904
Product Identification

Product ID:PARKS PAINT THINNER
MSDS Date:08/24/1988
FSC:8010
NIIN:00F001904
MSDS Number: BTHYH

Responsible Party
PARKS CORPORATION
SOMERSET, MA 02726
US

Emergency Phone: 508-679-5938

Info Phone: 508-679-5938

Cage: 6L244

Contractor
PARKS CORPORATION
5 SOMERSET, MA 02726 US

Telephone: 508-679-5938

Cage: 6L244

Ingredients

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9394

Hazards

LD50 LC50 Mixture:TLV 100 PPM (TWA)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAUSES EYE IRRITATION. MAY CAUSE SKIN
IRRITATION. PROLONGED OR REPEATED EXPOSURE MAY CAUSE SKIN REDNESS,
BURNING, DRYING AND CRACKING. BREATHING HIGH CONCENTRATIONS MAY
CAUSE IRRITATION OF NOSE AND TH ROAT, CNS DEPRESSION. INGESTION MAY
CAUSE DIGESTIVE TRACT IRRITATION AND CNS DEPRESSION. CHRONIC: BRAIN
AND CNS DAMAGE.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:EYE IRRITATION, SKIN
IRRITATION/CRACKING/BURNING/REDNESS, NOSE IRRITATION, THROAT
IRRITATION, DROWSINESS, DIZZINESS, LOSS OF COORDINATION, FATIGUE,
IRRITATION OF THE DIGESTIVE TRACT, ASPIRATION HAZARD .
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
DISORDERS AND LUNG DISORDER (EG ASTHMA-LIKE CONDITIONS) MAY BE
AGGRAVATED BY EXPOSURE TO THIS MATERIAL.

First Aid

First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP
WARM AND QUIET. GET MEDICAL ATTENTION. SKIN: WASH AFFECTED AREA
THOROUGHLY WITH SOAP AND WATER. IF IRRITATION PERSISTS, GET MEDICAL
ATTENTION. EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR 15 MINUTES.
GET MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. SEEK
MEDICAL HELP IMMEDIATELY.

Fire Fighting

Flash Point Method:TCC
Flash Point:101F,38C
Lower Limits:0.7 %
Upper Limits:6.0 %
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, UNIVERSAL TYPE FOAM
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:AVOID SPREADING BURNING WITH WATER USED
FOR COOLING PURPOSES. THIS MATERIAL IS COMBUSTIBLE AND MAY BE
IGNITED BY HEAT OR FLAME.

Accidental Release

Spill Release Procedures:FLUSH WITH WATER TO REATINING AREA OR
CONTAINER. AVOID EXPOSURE TO SPARKS, FIRE OR HOT METAL SURFACES.
SMALL AMOUNTS MAY BE ABSORBED INTO AN APPROPRIATE ABSORBENT.
PREVENT RUNOFF TO STREAMS, SEWERS, O R OTHER BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, AND OPEN
FLAME. USE WITH ADEQUATE VENTILATION. KEEP CONTAINER CLOSED.
PERSONNEL SHOULD AVOID INHALATION OF VAPORS.
Other Precautions:PERSONAL CONTACT WITH PRODUCT SHOULD BE AVOIDED.
SHOULD CONTACT BE MADE, REMOVE SATURATED CLOTHING AND FLUSH
AFFECTED AREA WITH WATER.

Exposure Controls

Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS FOR
CONCENTRATIONS ABOVE TLV LIMITS.
Ventilation:ADEQUATE VENTILATION REQUIRED. MECHANICAL AND LOCAL EXHAUST
RECOMMENDED.
Protective Gloves:IMPERMEABLE
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:SOURCE OF CLEAN WATER SHOULD BE AVAILABLE IN
WORK AREA FOR FLUSHING EYES AND SKIN. IMPERVIOUS CLOTHING AS
NEEDED.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:310F,154C
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:3.1
Vapor Density:4.9
Spec Gravity:0.789
Evaporation Rate & Reference:< 1 (ETHER = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WATER WHITE CLEAR LIQUID, HYDROCARBON TYPE ODOR
Percent Volatiles by Volume:100 %

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STORNG ACIDS OR BASES AND SELECTED AMINES.
Stability Condition to Avoid:HEAT, SPARKS, FIRE, OPEN FLAMES
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE AND/OR CARBON DIOXIDE.

Disposal

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.